Testinside – Best IT certification material provider

2. When making changes in the data collection interval of HP SIM, HP0-823 what is the next step to make the changes effective?
A. Restart SNMP
B. Shutdown Server
C. Restart HP SIM Server
D. Restart HP Management Agents
Answer: D

3. What is a valid method to configure iLO?
A. Smart Start
B. iLO Setup Utility
C. iLO Rom Based Setup Utility (RBSU)
D. Simple Network Management Protocol (SNMP)HP0-W01
Answer: C

4. What is the maximum number of physical processors supported in ProLiant BL p-Class systems?
A. 2
B. 4
C. 6
D. 8
Answer: B

5. Which ProLiant family server line HP0-823 enclosure includes the licenses to use Rapid Deployment Pack (RDP)?
A. ProLiant BL server
B. ProLiant ML server
C. ProLiant DL server
D. ProLiant entry-level server
Answer: A

6. Two arrays are configured on one Smart Array 6400 (SA6400) controller channel. One array consists of two Ultra 320 and three Ultra 3 hard drives and the other array consist of three Ultra 320 and two Ultra 3 hard drives. With a mix of Ultra 320 and Ultra 3 hard drives, what will help increase performance in the Ultra 320 storage subsystem?
A. Do nothing because all hard drives will run HP0-W01 at Ultra3.
B. Add two port expansion module (SA6400 EM).
C. Keep Ultra 320 and Ultra 3 hard drives in separate SCSI channels.
D. Keep Ultra 320 hard drives and Ultra 3 hard drives in separate arrays.
Answer: D

7. Which shared storage solution is used by the HP ProLiant Packaged Cluster and is end-to-end SCSI-based?
A. MSA30
B. MSA500
C. MSA1000
D. MSA1500
Answer: B

8. Which statement best describes HP ProLiant server availability?
A. the ability of a system to maintain services despite hardware or software failures
B. the ability of redundant network links to ensure access to the server during network outages
C. the ability of redundant power supplies to HP0-W01 ensure access to the server during power outages
D. the ability of redundant storage connections to ensure access to server data in case of a hardware failure
Answer: A

3.Which statements are true regarding a snapclone? (Select three.)

A:XCS supports snapclones across disk groups.
B:Snapclone is available instantaneously after it is taken.
C:A snapclone is only available after the full copy is complete.
D:Space is allocated in the disk group as the copy process needs it.
E:Space is fully allocated in the disk group at the moment of snapclone creation.HP0-823
Correct Answers: A, B, E

4.In a disk group set to double protection level, half the disk group capacity is used. A physical disk fails. What space is first used for data reconstruction?

A: assigned space
B: auto spare space
C: unassigned space
D: distributed spare space
Correct Answers: C

5.The EVA utilizes which method to secure access to a LUN?

A: switch zoning
B: Secure Path EVA
C: persistent host binding
D: selective storage presentation
Correct Answers: D

6.Which warranty and services are included with the HP0-Y11 EVA6000 product?

A: 3-year hardware support, with 4-hour response on a 24×7 basis and 1-year, 24×7 XCS phone-in support and updates
B: array installation and startup service, 2-year hardware support, with 4-hour response on a 24×7 basis and 2-year, 24×7 XCS phone-in support and updates
C: array installation and startup service, 2-year hardware support, with 4-hour response on a 24×7 basis and 3-year, 24×7 XCS phone-in support and updates
D: array installation and startup service, 3-year hardware support, with 4-hour response on a 24×7 basis and 1-year, 24×7 XCS phone-in support and updates
Correct Answers: B

7.What is the key customer benefit of the EVA solution?HP0-Y11

A: virtualization
B: 100% availability
C: isolated capacity
D: DAS to SAN architecture
Correct Answers: A

8.What does presenting a Vdisk refer to?

A: assigning the Vdisk to an HSV controller’s WWN
B: assigning the Vdisk to a host bus adapter(s) WWN
C: assigning the Vdisk a binding to a HP0-W02 fabric port WWN
D: assigning the Vdisk a drive letter within the operating system
Correct Answers: B

9.The Command View EVAPerf enables you to monitor and display what EVA performance metrics? (Select three.)

A:Vraid level data
B:replication data
C:virtual disk data
D:port status data
E:quorum disk data
F:controller cache data
Correct Answers: B, C, D

10.What is the default value for the disk HP0-W02 failure protection level in a disk group?

A: none
B: single
C: double
D: quadruple
Correct Answers: A

3.Which ambient air direction is used by the HP BladeSystem for cooling?

A: front-to-back
B: back-to-front
C: top-to-bottom
D: bottom-to-top
Correct Answers: A

4.You connect a fully-populated ProLiant BL40p blade server to the Diagnostic Station. When you attempt to power on the blade server, it does not turn on. Why?

A: ProLiant BL40p blade servers are not supported with the Diagnostic Station.
B: Two Diagnostic Stations are required to power the ProLiant BL40p blade servers.
C: You did not use the dual-power input kit.
D: You used a single power supply in the Diagnostic HP0-W02 Station instead of two.
Correct Answers: D

5.You have an enhanced blade server enclosure connected to a single 3U power enclosure. Only side A of the blade server enclosure is connected to the power enclosure. Which blade server enclosure bays receive DC power?

A: bays 1 through 4, plus the interconnect bay on side A
B: bays 1 through 8
C: bays 1 through 8, plus the interconnect bays
D: bays 1 through 4, plus the interconnect bays
E: bays 5 through 8, plus the interconnect bay on side A
Correct Answers: D

6.You have an Integrity BL60p blade server with internal disk drives installed in the enhanced blade server enclosure. One of the disk drives failed, but the Failure LED is not illuminated. Why?

A: The Failure LED illuminates only if using HP-branded disk drives.
B: The Failure LED is not supported by HP-UX.
C: The appropriate management functionality is not enabled in the EFI.
D: The appropriate HP-UX management device HP0-P10 drivers have not been loaded.
E: The enhanced blade server enclosure firmware must be version 2.30 or later.
Correct Answers: B

7.Which HP SIM plug-in component enables scanning for and patching of network vulnerabilities?

A: PIM
B: PMP
C: VMM
D: VPM
Correct Answers: D

8.After deploying a ProLiant BL35p blade server with RDP, the blade server is operating normally. However, you lose the capability to remotely manage the blade server using the Deployment Server Console. Why?

A: The administrator password is not set for the HP0-065 HP Insight Management Agents.
B: The Deployment Server Agent is not installed or failed to start.
C: The Deployment Server is out of valid iLO Advanced licenses.
D: The “Synchronize display names with Windows computer names” option is not set.
Correct Answers: B

9.You have a fully populated enhanced blade server enclosure. You connect to the blade server in bay 3 using the local I/O cable. You can navigate through the iLO of the local blade server, but not the other blade servers. Why?

A: The management module on the back of the blade server enclosure is incorrectly configured.
B: The front blade server port connection limits access to the blade server it is connected to.
C: The power enclosure and the blade server HP0-065 enclosure management ports are not cabled or cabled incorrectly.
D: The iLO Advanced firmware is older than version 1.64.
Correct Answers: B

10.When accessing the iLO BL p-Class tab, HP0-791you receive the “Unable to collect rack data” error message. Why? Select TWO.

A:You have not yet licensed all blade server iLOs.
B:At least one power enclosure or blade server enclosure does not meet the minimum firmware requirements.
C:A DHCP server exists on the network and conflicts with the Static IP Bay Configuration feature.
D:At least one blade server iLO is not configured.HP0-791
E:At least one management module has mismatched firmware.
Correct Answers: B, E

Download Free Latest Testinside Certification Braindumps

1. Free Testinside testking HP0-J21
2. Free Testinside Testking nortel 920-259 exam
3. Free Testinside Testking 117-151 certification exam download
4. Free Testinside testking HP0-J19 exam
5. Free Testinside Testking Nortel 922-098 exam simulator dumps
6. Free Testinside Testking Cisco 350-030 exams actualtest download
7. Free Testinside free Testking IBM 000-237 certification exam actualtest
8. Free Testinside testinside HP Certification exam dumps
9. Free Testinside Testking exin ex0-101 simulation dumps
10. Free Testinside Testking 156-215.1 certification exam demo