Free Offer Best Practice cisco Testinside CCIE 350-024 Test Prep,Bootcamp |Download Testinside Testinside CCIE 350-024 PDF Real online Q&A Braindumps

Testinside CCIE 350-024

Filed Under (cisco) by Testinside Sadikhov on 22-10-2008
Visited 18 times, 1 so far today

CCIE SP IP Telephony Qualification Exam : 350-024 Exam

Exam Number/Code: 350-024
Exam Name: CCIE SP IP Telephony Qualification Exam

“CCIE SP IP Telephony Qualification Exam”, also known as 350-024 exam, is a Cisco certification.
Preparing for the 350-024 exam? Searching 350-024 Test Questions, 350-024 Practice Exam, 350-024 Dumps?

Free 350-024 Demo Download
TestInside offers free demo for 350-024 exam ( CCIE SP IP Telephony Qualification Exam). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.

QUESTION 27:
Below are four ‘out’ access-lists, configured on an interface. What list will block an
IP packet with source address 144.23.67.94, destination address 197.55.34.254,
destination TCP port 23 from leaving the router?
A. access-list 100 deny ip tcp 144.23.67.0 0.0.0.7 eq telnet 197.55.34.240 0.0.0.15 eq
telnetaccess-list 100 permit ip any any
B. access-list 100 deny tcp 144.23.67.94 0.0.0.7 any eq telnetaccess-list 100 permit ip
any any
C. access-list 100 deny tcp 144.23.67.86 0.0.0.7 eq telnet 197.55.34.240
0.0.0.15access-list 100 permit ip any any
D. access-list 100 deny ip 144.23.67.94 0.0.0.7 host 144.23.67.94access-list 100 permit
ip any any
Answer: B
QUESTION 28:
Exhibit:
According to the diagram, what attribute is initiated by AS200 (IBGP) to give
preference to the path A or D traffic will take when going from AS200 to AS100?
What attribute is initiated by AS200 (EBGP) to give preference to the path B or C
traffic will take when going from AS100 to AS200?
A. MED; Origin
B. MED; Local Preference
C. Community; Origin
D. Local Preference; MED
E. Origin; Community
Answer: D
QUESTION 29:
In BGP, why should a Route Reflector be used?
A. To overcome issues of split-horizon within BGP
B. To reduce the number of External BGP peers by allowing updates to reflect
without the need to be fully meshed
C. To allow the router to reflect updates from one Internal BGP speaker to another
without the need to be fully meshed
D. To divide Autonomous Systems into mini-Autonomous Systems, allowing the
reduction in the number of peers
E. None of the above
Answer: C